Home / Guides / Deliverability

How to warm up a new domain or IP address

Why new domains and IPs start with no reputation, how to ramp up volume gradually, and what to watch so you reach the inbox from day one.

7 min read · Updated 27 October 2026 · By the dijitul team

Warming up means building a sending reputation for a new domain or IP address by starting with small volumes to your most engaged recipients and increasing gradually over several weeks. Mailbox providers have no history for a new sender, so they treat it cautiously. A steady, well-received ramp shows them you are a legitimate sender; a sudden blast to a big list looks like a spammer and gets filtered.

Why reputation starts at zero

Gmail, Microsoft, Yahoo and the rest decide where to deliver mail largely on reputation: how recipients have reacted to mail from that domain and IP in the past. Do people open it, reply, move it out of spam? Or do they delete it unread and press "report spam"?

A new domain or a new dedicated IP has none of that history. It is not a bad reputation, it is no reputation, and providers handle the unknown carefully. They may accept a little mail, watch what happens, and throttle the rest with temporary "try again later" deferrals. That is normal and not a sign that something is broken.

You need to warm up when:

  • You register a new domain or start sending from a subdomain for the first time.
  • You move to a dedicated IP address with your email provider.
  • You change email marketing platforms and your new provider puts you on fresh infrastructure.
  • A domain has sat unused for months and you want to start sending in volume again.
Warm-up builds on authentication; it does not replace it. Before sending a single campaign, make sure SPF, DKIM and DMARC are passing on the new domain. See our guides to SPF, DKIM and DMARC.

An example warm-up schedule

There is no official schedule from any mailbox provider, and anyone who claims to know the exact numbers is guessing. The table below is a sensible starting point for a sender aiming at around 50,000 emails a day. Treat it as a guideline, not a rule: if your metrics look good, carry on; if deferrals, bounces or complaints rise, hold your volume or step back for a few days.

DaysEmails per dayWho to send to
1 to 350 to 200Opened or clicked in the last 30 days
4 to 7500 to 1,000Engaged in the last 30 days
8 to 142,000 to 5,000Engaged in the last 60 days
15 to 2110,000 to 20,000Engaged in the last 90 days
22 to 3025,000 to 50,000Wider active list

A few principles matter more than the exact figures:

  • Increase gradually. Roughly doubling every couple of days is a reasonable pace when results are clean.
  • Be consistent. Send every day or on a regular pattern. Big gaps followed by big spikes undo progress.
  • Spread volume across the day rather than releasing everything in one burst.
  • Watch each provider separately. If Microsoft is deferring but Gmail is fine, slow down for Microsoft addresses only, if your platform allows it.

Send to engaged recipients first

Who you send to in the first two weeks matters more than how many. The people most likely to open, click and reply are the ones who have done so recently, so start with them. Their positive reactions are what build your reputation.

Leave out anyone who has not engaged in six months or more, any addresses you have never emailed before, and anything bought, rented or scraped. Old and unverified addresses produce hard bounces and can include spam traps: abandoned or never-used addresses that blocklist operators monitor. Hitting traps during warm-up is one of the quickest ways to end up on a blacklist; our blacklist removal guide explains what happens if you do.

Content counts too. Send the mail people actually want: order confirmations, account updates and your most popular newsletter content, not a hard-sell promotion to people who barely remember signing up.

Check your setup now: run a free test at mail-tester.co.uk and see your score in seconds.

What to monitor

Google Postmaster Tools

Google Postmaster Tools is free and shows how Gmail sees your domain, including the user-reported spam rate and authentication results. You verify your domain with a DNS TXT record. Data only appears once you send a reasonable daily volume to Gmail addresses, so do not worry if it is empty for the first few days.

Microsoft SNDS

Microsoft's Smart Network Data Services (SNDS) reports on how Outlook.com sees your sending IP addresses, including complaint data and whether mail is being trapped. It is IP-based, so it is most useful if you have a dedicated IP.

Your sending platform's reports

Track per-provider delivery, deferrals, bounces, complaints, and engagement for every send. Deferrals with codes like 421 mean "slow down"; respect them rather than retrying aggressively.

Bounce and complaint thresholds

Gmail and Yahoo's bulk-sender rules, in force since February 2024, require spam complaint rates below 0.3%, and Google recommends staying below 0.1%. During warm-up you want to sit comfortably below that, because a new sender gets less benefit of the doubt.

For bounces, a common rule of thumb is to investigate anything above about 2% hard bounces on a send. A high bounce rate means your list contains old or invalid addresses, which tells providers you are not maintaining it. Remove hard-bounced addresses immediately and never retry them.

If complaints or bounces climb, stop increasing volume. Narrow your audience back to your most engaged recipients for several days until the numbers recover, then resume the ramp more slowly.

Separate marketing and transactional mail

Password resets and order confirmations must arrive. Marketing campaigns carry more risk, because they are more likely to be ignored or reported. If both share the same domain, a badly received campaign can drag down delivery of your essential mail.

The usual answer is to use subdomains for each stream, for example:

Transactional:  notify.example.co.uk
Marketing:      news.example.co.uk
Staff mail:     example.co.uk

Each subdomain builds its own reputation, so each one needs its own warm-up and its own SPF and DKIM setup. Your organisational DMARC record on example.co.uk covers subdomains unless you override it. Subdomains share some reputation with the parent, so this is not a way to escape the consequences of poor sending; it is a way to stop one stream harming the other.

Marketing mail also needs a working unsubscribe link and, for bulk senders, a one-click unsubscribe header. See our one-click unsubscribe guide and the full Gmail and Yahoo sender requirements.

Before you start: a quick checklist

  • SPF, DKIM and DMARC passing on the new domain or subdomain.
  • Reverse DNS set on any dedicated IP (see our reverse DNS guide).
  • Your list segmented by last engagement date, with stale and unverified addresses removed.
  • Google Postmaster Tools verified, and SNDS registered if you have a dedicated IP.
  • A test email scoring well at Mail Tester UK before the first real send.

Warm-up is mostly patience. A few weeks of controlled sending costs far less than months spent recovering from a reputation damaged on day one.

Frequently asked questions

How long does email warm-up take?

Typically a few weeks, depending on how much you eventually want to send and how well recipients engage. Larger target volumes and weaker engagement mean a longer ramp.

Do I need to warm up a new domain if I use a shared IP?

Yes. Mailbox providers such as Gmail track domain reputation separately from IP reputation, so a brand-new domain still has no history even on a well-established shared IP.

What spam complaint rate is acceptable?

Gmail and Yahoo require bulk senders to stay below 0.3%, and Google recommends keeping it below 0.1%. During warm-up you want to be well under both.

Can I speed up warm-up by sending to my whole list at once?

No. A sudden spike from an unknown sender is exactly what spam looks like, and it usually leads to throttling, spam-folder placement or blocks that take longer to recover from than the warm-up would have taken.

Do automated warm-up services work?

Real engagement from your actual audience is what builds lasting reputation. Artificial engagement networks may produce signals mailbox providers can recognise, so treat them with caution and never rely on them instead of a genuine ramp.

From the team behind Mail Tester UK

More from dijitul